Skip to content
Attachments for Tractors, Skidsteers & Excavators!
Ventura Group USA
Search our store.
3-Point Center Mounted Flail Mowers
Ditch Bank Flail Mowers
Excavator Flail Mowers
Skid Steer Flail Mowers
3-Point Forestry Mulchers
Excavator Forestry Mulchers
Skid Steer Mulchers
Nav Menu 2
Nav Menu 3
Nav Menu 4
Nav Menu 5
Nav Menu 6
Nav Menu 7
Nav Menu 8
Trim-R 240E Ditch Bank Flail Mower:
100-150HP, 95" Cut, Hyd Offset & Tilt
Call 563-946-2121 For Pricing.
Usually Ships in 2 to 4 Weeks.
Expect Excellent Quality & Results!
This Ventura Flail Mower has
22 Very Large
Solid Cast Steel Hammer Blades - Ventura Flail Mowers always have the Highest Population of Blades to Provide the Best Possible Cut & Reduce the Burden on Your Tractor!
Ventura Mower Gearboxes include an Over-Running Clutch, which Provides Two Advantages:
First, Easy Alignment & Attachment of the Mowers PTO Shaft to the Tractors PTO Shaft:
The O.R. Clutch enables you to freely spin the PTO Shaft & Gearbox for Alignment!
Second, Smooth Shut Down:
The O.R. Clutch allows the Mower Gearbox to Free Wheel to a Stop, eliminating abrupt shutdowns & premature wear of the PTO Brake!
Rear Roller provides Mower Deck Suspension & Cutting Height Adjustment (1/2"-6").
'Under Deck Mulching Grating' ensures reduction of Larger Clippings & further reduces the Smaller Ones.
Offset & Head Positioning Functions Operate Hydraulically.
With the External Gearbox & Unique Hitch Configuration of Ventura Mowers, Expect to Get the Most Right Side Reach Possible!
Ventura's Trim-R Series Includes a Pneumatic Cushion Ride System which cushions Shock Load Transfer from abrupt Operator Articulation (of the Large Mower Head) & from Sudden Grade Recesses, or Drops!
Blade Tip to Blade Tip Dia is 19"!
Multiple Advantages of This Offsetable Mower Over Static, Center Mounted 3-Point Mowers:
If you are Mowing along a fenceline, treeline, building, etc., instead of getting your entire Tractor along side of the Fence or Building (and risk scraping your Tractor tires or snagging & damaging trees, posts, fencing, buildings, etc.), you can simply keep the Offset part of the Mower close to the edges you want to Mow and prevent any Damage to the Tractor or the trees, fencing, walls, etc. Snagging posts, trees or other secured objects can also damage the 3-Point linkage on the Mower or even the pull arms & top link of your Tractor.
Much, Much Better Visibility:
If the edge of any Mower is flush with the sidewall of your tractors tire, forget about visibility! You will be cutting with your tractor tire as a 'guide', which is ok in open areas, but again, when you are Mowing up against obstacles, you want visibility, and the Offset feature will provide that. It will also eliminate the need to look back over your shoulder to see the Mower Deck. A simple glance to your right gives you visibility of the outer Mowing Edge.
Ventura Flail Mowers provide a Much Better Cut than Standard Rotary Mowers, plus with the 'Solid Cast Hammer' Blades on this Flail Mower, you can cut 4" Diameter Material & get a Very Good Finish Cut Too!
Ventura Flail Mowers are the Safest & Most Efficient Mowers Available:
With Ventura Flail Mowers, the Possibility of Discharging Dangerous Projectiles is dramatically reduced compared to Conventional Rotary Mowers, and with the reduced Deck Depth & Weight, they're the easiest for you & your Tractor to handle! Plus, the Superior 'Single-Pass' cut of Ventura Flail Mowers provides New Efficiencies by Eliminating Multiple Passes for Excellent Results!
Sample Video shows a Ventura 201E, but this Listing is for a 240E.
Mower Ships with 1-3/8", 20 Spline 1000RPM PTO Shaft!
Rated for 100 to 150HP Tractors.
Suitable for Cat 2, 3-Point Hitches.
Maximum Horizontal Reach to Outside Cutting Edge is 12'.
Mowing Width: 95".
Overall Width: 114".
Maximum Upward Angle: 90°.
Maximum Downward Angle: 60°.
Electronically Balanced Rotor has 22 Huge Hammer Style Blades.
Rotor & Blades are Rated to Cut 4" Diameter Material.
Requires Two Sets of Hydraulic Outlets.
Weight is 2618lb's (Less Pallet/Crate & PTO Shaft).
Specifications are based on manufacturer provided data & subject to change.
M220 Double Hitch Flail Mower:
60-100HP, 87" Cut, Hyd Offset
MPT240 Center Mount Flail Mower:
80-110HP, 96" Cut, Hyd Offset
TFC80 Excavator Flail Mower:
8-15GPM, 32" Cut, Swinging Blades
Roadside PRO205 Hybrid Ditch Bank Flail Mower:
70-150HP, 77" Cut, Hyd Offset & Tilt
Roadside PRO225 Hybrid Ditch Bank Flail Mower:
80-150HP, 85" Cut, Hyd Offset & Tilt
TFM80 Excavator Flail Mower:
12-25GPM, 32" Cut, Swinging Blades
Trim 221E Ditch Bank Flail Mower:
90-120HP, 87" Cut, Hyd Offset & Tilt
SS200 SkidSteer Flail Mower & Mulcher:
18-24GPM, 79" Cut, 2 Sets of Teeth
Back to top