Skip to content
Attachments for Tractors, Skidsteers & Excavators!
Ventura Group USA
Search our store.
3-Point Center Mounted Flail Mowers
Ditch Bank Flail Mowers
Excavator Flail Mowers
Skid Steer Flail Mowers
3-Point Forestry Mulchers
Excavator Forestry Mulchers
Skid Steer Mulchers
Nav Menu 2
Nav Menu 3
Nav Menu 4
Nav Menu 5
Nav Menu 6
Nav Menu 7
Nav Menu 8
Roadside PRO175 Hybrid Ditch Bank Flail Mower:
60-150HP, 69" Cut, Hyd Offset & Tilt
Call 563-946-2121 For Pricing.
Usually Ships in 2 to 4 Weeks.
Expect Excellent Quality & Results!
The Ventura Roadside PRO has
Solid Cast Steel Hammer Blades - Ventura Flail Mowers always have the Highest Population of Blades to Provide the Best Possible Cut & Reduce the Burden on Your Tractor!
Ventura Mower Gearboxes include an Over-Running Clutch, which Provides Two Advantages:
First, Easy Alignment & Attachment of the Mowers PTO Shaft to the Tractors PTO Shaft:
The O.R. Clutch enables you to freely spin the PTO Shaft & Gearbox for Alignment!
Second, Smooth Shut Down:
The O.R. Clutch allows the Mower Gearbox to Free Wheel to a Stop, eliminating abrupt shutdowns & premature wear of the PTO Brake!
Rear Roller provides Mower Deck Suspension & Cutting Height Adjustment (1/2"-5").
'Under Deck, Mulching Grating' ensures reduction of Larger Clippings & further reduces the Smaller Ones.
Under Deck Grating is Integrated with the Protective (Internal) Double Skin.
Ventura's Roadside PRO Offers Hydraulic Tilt (Head Raise/Lower) along with a unique 28" Hydraulic Offset, all Adjustable on the Fly!
Break Away Latching can be Reset in Reverse.
Multiple Advantages of This Articulating & Offsetable Roadside PRO Disc Mower:
Disc Mower Blades:
Disc Mower Blades Are Delicate:
Because Disc Mower Blades are Intended for Cutting Hay, they are easily damaged in other Applications & require frequent replacement. In addition to frequent Maintenance Intervals, Mowing Intervals must also be frequent.
VENTURA'S Roadside PRO has Large, Durable Hammer Type Flail Mower Blades:
These Large Hammer Blades are Sharpenable, have very Long Maintenance Intervals & last a very, very long time! Plus, Mowing Intervals can be as infrequent as needed, because the Roadside PRO will provide Excellent Single Pass Results in the Thickest & Tallest Vegetation!
Disc Mower Rotors are also Delicate:
After frequent replacement of Blades, the Rotors are the next common Maintenance nuisance.
Plus, with Multiple Rotors, Come Multiple Gear Drive Assemblies, Extensive & Costly Maintenance & Repairs, and Potential Lubrication Issues.
VENTURA'S Roadside PRO does Not have any Delicate Components:
The Large, Durable Hammer Blades are Bolted into a Heavy Duty Clevis which is Welded to an Electronically Balanced Rotor that endures anything your Mowing activities will introduce to it...even limited Land Clearing Activities! In fact, this Hammer Blade & Rotor Combination are Rated to cut 4" Diameter Vegetation & still Provide an Excellent Rough or Finish Cut!
Disc Mower Mowing Heads are Supported only by Tractors 3-Point, Delicate Rotor Wear Plates & Skid Shoes:
This requires use of Larger Tractors, prevents use of Smaller, Convenient & Efficient Utility Tractors & limits the size selection of the Cutter Head.
VENTURA'S Roadside PRO is Supported by a Full Width Rear Roller, Side Skid Shoes & has an Optional Tail Wheel:
The Large Diameter Rear Roller Supports the entire Mower & provides Cutting Height Adjustment (1/2"-5").
The Combination of the Rear Roller & Optional Tail Wheel enables use of Smaller Tractors, eases the Load on Tractors 3-Point & contributes to overall Safer Operation!
Disc Mowers have Delicate Aprons:
Easily Damaged Aprons are expensive to replace & a nuisance to deal with, but imperative for safety. Potential Projectiles not only easily damage these Aprons, but the Apron is not adequate to prevent Projectiles from passing through them!
VENTURA'S Roadside PRO Relies on a Large Volume, 7 Gauge Double Shell Steel Shroud!
Potential Projectiles are Captured or Knocked Down in Much Greater Quantity than Disc Mower Aprons!
This Substantial Steel Shroud is complimented with Front & Rear Deflectors & 3/8" Thick Steel Side Plates!
Disc Mowers Leave Long Strands of Grass & Vegetation:
These Long Strands are Beautiful in Hay Fields, but not a Compliment to Mowing Maintenance on Roadsides.
Because Disc Mowers were Intended for Hay, it's not Clippings that are left behind, it's Large Strands of Hay & Grass..ready for Baling!
VENTURA'S Roadside PRO Provides Beautiful Results!
With it's Rigorous Rotor & Hammer Blades, Ventura's Roadside PRO reduces ALL Vegetation to Fine, Mulched Pieces, providing a Better Finished Appearance & Contributing to Faster Decomposition. With the Internal Double Counter Grating Blade, even the Largest Pieces of Branches, Limbs, Trunks, even Lumber Trash will be reduced to Small Fragments!
Yes, you can even Mow down Bushes, Brushes & Saplings with this Mower, and achieve additional Efficiencies from it's Multi-Purpose Capabilities!
Sample Video shows a Ventura 221E: this Listing is for a Roadside PRO175:
Hydraulic Components & Functions are different, but the Excellent Cutting Results will be the same!
Actual Video coming soon!
Mower Ships Factory Assembled & Ready To Use:
This Means No Assembly Headaches from Poor Instructions, No Missing Parts & Associated Delays, No Special Tools, No Knuckle Busters & No Waiting Until It's Assembled Before First Use!
Mower Ships with 540RPM PTO Shaft!
Rated for 60 to 150HP Tractors.
Suitable for Cat 2, 3-Point Hitches.
Maximum Horizontal Reach to Outside Cutting Edge is 10'-5".
Mowing Width: 69".
Overall Contracted Width: 133".
Maximum Upward Angle: 90°.
Maximum Downward Angle: 50°.
Electronically Balanced Rotor has 16 Hammer Style Blades.
Rotor & Blades Rated to Cut 4" Diameter Material.
Requires Two Sets of Hydraulic Outlets.
Weight is 1930lb's (Less Pallet/Crate & PTO Shaft).
Specifications are based on manufacturer provided data & subject to change.
TFC80 Excavator Flail Mower:
8-15GPM, 32" Cut, Swinging Blades
Trim 221E Ditch Bank Flail Mower:
90-120HP, 87" Cut, Hyd Offset & Tilt
Trim 161E Ditch Bank Flail Mower:
40-75HP, 63" Cut, Hyd Offset & Tilt
TFM100 Excavator Flail Mower:
16-27GPM, 40" Cut, Swinging Blades
Trim 181E Ditch Bank Flail Mower:
60-90HP, 72" Cut, Hyd Offset & Tilt
Trim-R 240E Ditch Bank Flail Mower:
100-150HP, 95" Cut, Hyd Offset & Tilt
TFM80 Excavator Flail Mower:
12-25GPM, 32" Cut, Swinging Blades
SS200 SkidSteer Flail Mower & Mulcher:
18-24GPM, 79" Cut, 2 Teeth Types
Back to top